Section 8

• Front plate pocket with inverted “T” elastic keeper can also accommodate bib when plates are not in use for a lower profile rig
• Plate pocket holds Level IV plates up to 10x12
• Cross-back design can be replaced with a plate carrier back-panel (37CL41)
• S.T.R.I.K.E.™/MOLLE attachment allows the user to configure pouches as needed
• Shoulder straps have double D-Rings and elastic/webbingloops as additional attachment points, and are padded with closed-cell foam for comfort

• Zipper along top edge of cummerbund allows for internal storage; STRIKE webbing allows mounting of pouches or holsters on inside
• Magazine pockets along front with quick release tabs and dividers for up to eight M-16/M4 magazines
• Single plate pocket with inverted “T” elastic keeper for a tri-curve plate up to 10x12
• Front plate pocket with inverted “T” elastic keeper can also accommodate bib when plates are not in use for a lower profile rig

• Patent # D488,290     
• Can be combined with the 37CL01 S.T.R.I.K.E.™ 
• Commando Recon Chest Harness for a full front/back rig
• Bottom has a large grommetted flap with hook & loop closure that opens to insert up to a 10x12-in ballistic plate
• Patented IVS™ back panels for increased air flow/ventilation
• Shoulder strap adapter included
• Reinforced drag handle

Model:  32V301AU-GSA, 32V301CT-GSA, 32V301BK-GSA or 32V301OD-GSA

• Takes Level IV ballistic armor plates (up to 11x14) in fully adjustable front and rear pockets
• Front plate pocket with inverted “T” elastic keeper can also accommodate bib when plates are not in use for a lower profile rig
• S.T.R.I.K.E. webbing on inside of front pocket provides the internal platform to mount additional pouches or holsters
• Side plates: custom side plate pouch system holds plates up to 6x8
• Lightweight: only 3.1 lbs; lightest cutaway plate carrier available Ambidextrous for high performance
• Fast and easy to put on and take off using side release buckles Secure release strap has a round handle that is secured inside a protective band of nylon on the front panel shoulder
• Two-stage release so operator can choose partial cutaway of side panels only
• Cutaway function can be easily disabled if desired
• Simple construction that is very easy to reassemble
• Adjustable waist and shoulder system for girth and torso length for tailored fit
• Fully covered with S.T.R.I.K.E./MOLLE webbing for any pouch configurations
• Heavy Duty Drag Handle

Model:  32V101AU-GSA, 32V101BK-GSA, 32V101CT-GSA or 32V101OD-GSA

• Lightweight: only 3.5 lbs; lightest cutaway available
• Ambidextrous for high performance
• Fast and easy to put on and take off using side release buckles
• Secure release strap has a round handle that is secured inside a protective band of nylon on the front panel shoulder
• Two-stage release so operator can choose partial cutaway of side panels only
• Cutaway function can be easily disabled if desired
• Simple construction that is very easy to reassemble
• Adjustable waist and shoulder system for girth and torso
  length for tailored fit
• Full outer vest area usage for any S.T.R.I.K.E./MOLLE 
  pouch configurations
• Lined with cool and comfortable soft 3-d mesh to move air
  around your body
  Armor - holds soft level IIIA as well as Level IV ballistic armor plates (up to 11x14) in internal adjustable pockets
• Side plates: custom side plate pouch system holds plates up to 6x8
• Accessories: accommodates level 3 collar, groin, and shoulder yokes
• Heavy Duty Drag Handle

Model:  32V201AU-GSA or 32V201CT-GSA

• Takes military-issued soft Level IIIA armor panels: OTV-IBAS design - a baffle down the front of the vest allows the overlap of soft panels, but without the cumbersome double-breasted hook & loop of issued vests
• Lightweight: only 3.5 lbs; lightest cutaway available
• Ambidextrous for high performance
• Fast and easy to put on and take off using side release buckles
• Secure release strap has a round handle that is secured inside a protective band of nylon on the front panel shoulder
• Two-stage release so operator can choose partial cutaway of side panels only
• Cutaway function can be easily disabled if desired
• Simple construction that is very easy to reassemble
• Adjustable waist and shoulder system for girth and torso length for tailored fit
• Full outer vest area usage for any S.T.R.I.K.E./MOLLE pouch configurations
• Lined with cool and comfortable soft 3-d mesh to move airaround your body
• Armor - holds military soft level IIIA panels in internal cells as well as Level IV ballistic armor plates (up to 11x14) in external pockets
• Side plates: custom side plate pouch system holds plates up to 6x8
• Accessories: accommodates level 3 collar, groin, and shoulder yokes
• Heavy Duty Drag Handle

• Protects the wearer’s exposed sides between front and rear ballistic plates when worn with a standard vest
• Holds either an 8 X 10 or 10 X 12 ballistic plate (not included) in one of two tailored internal pockets
• Can be worn over either shoulder or front/back with an adjustable strap and includes an adjustable waist strap for stability when moving
• Side-release buckles allow for quick mounting or removal
• Includes external MOLLE straps to mount holster, mag cases, flashlight cases, medic pouches, etc.
• Options:
   -  Keep on seat or in trunk of Patrol Car for first response
       Level IV protection
   -  Double over the shoulder for both exposed sides (turret
       gunners)
   -  Over the neck for rapid frontal protection
   -  Daisy-chained (two carriers; front/back) over the neck
       for hasty vest        
    -  Dismounted for hasty cover behind plate (sniper hide
       position, etc.)

• Weight:  1 lb.
• 600 Denier Nylon
• Emergency drag handle
• Side release buckles on shoulders and waist strap
• Compression molded panels
• Easy access to ballistic panels with pull down flaps
• Accepts standard 10x12 plates
• Size:  Medium - X-Large (Adjustable)   

• Tactical Vest System includes: Vest, Detachable Collars, Throat, Shoulders, and Groin Protector.
• Heavy weight webbing over entire vest for modular pouches.
• Accepts up to 11" x 14" ballistic plate, front and back. (Plate is not included)
• Hydration system compatible
• Emergency drags handle
• Two adjustable waist tension straps on each side.

• Emergency drag handle.
• Detachable shoulder pads.
• Side release buckles on shoulders and internal waist strap.
• Accepts up to 10 x 13 plates.
• Easy access to ballistic plates with pull down flaps.
• Adjustable/detachable cummerbund  with pockets for side armor.
• One front map pocket with snap, hook & loop closure.
• All armor compartments (front, back & two side) have hook and loop panel.
• Lightly padded mesh on front and back harness for comfort and airflow.
• Size:  Medium - X-Large (Adjustable)